Drills

3/4” DRILL
Bosch Model 1103R
Features:
2-Speed Reversible
Full Length Cross Handle for safe control at full torque
Specifications:
115V 6 amp electric motor
Capacities – Wood: 2-1/2”
– Aluminum: 1-1/4”
– Steel: 3/4”
No load rpm: low gear 400, high gear 850
Length: 22-3/4”
Weight: 10 lbs
Optional Accessory:
Portable Drill Stand
MAGNETIC DRILL 1-3/8”
HIT Model 29MD35-2
Includes:
Carrying Case
Webbed Shoulder Strap
Side Handle
Guide Pin
Specifications:
Cutter shank size 3/4”
Maximum hole size: 1-3/8” dia. x 1-3/16” deep
Minimum thickness of workplace: 7/16”(12mm)*
*If it is not at least 7/16” thick, place a piece steel plate at least 7/16” thick,
or thicker, below the work surface, to supplement the magnetic adhesion.
8 amps 120 Volts
Magnetic Adhesion: 15,000N
Weight: 22.4 lbsCAUTION!
Other magnetic drills used on the same work place will cause
uneven voltage that could lead to the magnet releasing.

Never use the drill upside down

Do not exceed 90 degrees from horizontal

Do not operate with dull or damaged teeth as this will damage
the motor.

Use a cooling lubricant on cutters and reapply as needed
throughout the cut.

CORE DRILL, ELECTRIC
Milwaukee Model 4130
48-61-0100 Meter Box
49-22-7075 Large Base Vacuum Rig
Includes: Cross Handle,
Open End Wrench
Vacuum PlateSeparate charge for diamond bits, if needed.
DIAMOND CORE BITS (premium)
Rated for medium aggregate w/mild steel (re-bar)
Sizes Available:
1-1/4 inch
1-1/2 inch
2 inch
2-1/2 inch
3 inch
3-1/2 inch
4 inch
5 inch
6 inch
8 inch