| NEEDLE SCALER/FLUX CHIPPER | |
 |
Jet Model F-25NS Features: Heavy-duty heat-treated barrels & pistons for reliability Ball lock retainer permits quick tool change Included angle chisel converts tool to a flux chipper Specifications: Blows per minute: 4,000 Stroke Length: 7/8 inch Number of Needles: 19 Size of Needles: 3mm Air Inlet: 1/4″ NPT Air Consumption: 4 CFM Air Pressure: 90 PSI Weight: 6 lbs |
| 1″ DR. PNEUMATIC IMPACT WRENCH | |
 |
Jet Model 1010ES Specifications: Bolt Capacity: 1-1/4″ Average Torque: 1400 ft. lbs Recommended Air Pressure: 90 PSI Average Air Consumption: 35 CFM Min Compressor Size: 7-1/2 hp Air Inlet: 1/2″ Overall length: 22-7/16″ Weight: 30 lbs |
JACK HAMMER, PNEUMATIC 35 LB
MacDonald Model
JACK HAMMER, PNEUMATIC, 65 LB
Mac Donald Model
JACK HAMMER, PNEUMATIC 90 LB
McDonald Model
HOSES & HAMMER STEEL FOR AIR HAMMERS:
3/4″ x 50′ AIR HOSE
With Dixon 2-Lug Universal Fitting
AIR HAMMER STEEL
Point
Chisel 1-1/8″
Chisel, 3″
Chisel, Dig 3″
Asphalt Cutter
Clay Spade
Pin/Spike Driver
Ground Rod Driver
Tamper Plate 8″, includes shank
Air Nailers
Air Staplers
Air Hoses
Air Regulators
We sell air fittings, nails, nailers and staplers, and parts.
