| ROTARY HAMMER 3/4” SDS PLUS | |
  Small diameter SDS bit |
Bosch Model “Bull Dog” 11212VSR” Includes: Case, Auxiliary Handle, Depth Gauge Features: Reversing switch D-Handle Design for extra control Safety Clutch protects tool & operator; instantly resets when load is removed Specifications: Max size Hole Capacities w/Carbide Tipped Bit: Steel: 3/4” diameter Wood: 1/2” diameter SDS Plus Speed Core Bit: 1-1/2” diameter No Load RPM: 0 – 1,100 No Load BPM: 0 – 5,000 Dimensions 18” x 12” x 5” 4 amp 115V double insulated Weight: 6 lbs |
| SDS PLUS Roto Hammer Bits: | |
 |
5/32” carbide bit 3/16” carbide bit 1/4” carbide bit 5/16” carbide bit 3/8” carbide bit 13/32” carbide bit 7/16” carbide bit 1/2” carbide bit 9/16” carbide bit 5/8” carbide bit 11/16” carbide bit 3./4” carbide bit |
|
ROTARY-DEMOLITION HAMMER SDS MAX |
|
|
Bosch 11245EVS Includes: Carrying Case, Auxiliary Handle Features: 2 Modes of Operation: Hammer Only or Rotary-Hammer Variable speed drill dial for accurate bit starting and controlled chipping Variable positioning – rotates and locks chisel into 12 different positions 360 degree auxiliary side handle Specifications: 14 amp 120V electric motor – 8′ cord Concrete Capacity Range: 3/4” – 1-3/4”  Max drill bit: 2” in concrete Max core bit: 6” in concrete No load BPM: 1100 – 2500 No load RPM 120 – 250 Dimensions: 23.5” L x 10.5” H Weight: 23.5 lbs If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| ROTARY-DEMOLITION HAMMER SDS MAX | |
|
Hitachi DH40MR Features: 2 modes: Hammer only and Hammer+Drill Soft non-slip grip absorbs vibration Includes: Carrying Case, Depth Gauge, Side Handle Specifications: Chuck Size: 1-9/16” Capacity-SDS Drill Bit: 1-9/16” SDS MAX”Capacity- SDS Core Bit: 4-1/8” Impact Energy: 7.4 ft lbs. No-load speed: 240-480 rpm Motor: 9.2 amp double insulated Max Bit in Concrete 1-1/2” Max Core Bit in Concrete: 4-1/8” Power Input: 870 Watts Tool Length: 17-5/16” Weight 14.3 lbs If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| ROTARY-DEMOLITION HAMMER | |
|
Hitachi DH40FR SPLINE SHANK Features: 2 modes of operation: Hammer only and Hammer+Drill Single Speed, 10′ Cord Includes: Carrying Case, Depth Gauge, Side Handle  Specifications: Chuck Size: 1-9/16” Motor: 9.2 amp double insulated Capacity-SDS Drill Bit: 1-9/16” Capacity- SDS Core Bit: 4-1/8” Impact Energy: 7.4 ft lbs. Max Blows Per Min: 1320-2650 No-load speed: 240-480 rpm Spline for Drilling”Spline Carbide Bit Capacity: 1-1/2” Core Bit Capacity: 4-1/8” Handle Type: D Power Input: 870 Watts Tool Length: 17-5/16” Weight: 14.3 lbs If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| ROTARY-DEMOLITION HAMMER – SDS Max | |
   |
Bosch Model RH540M – SDS Max Features: Rotary Hammer or Hammer Only Vari-lock mechanism lets users angle the chisel into 12 different positions Includes: Carrying Case Auxiliary Handle  Features:Keyless Chuck Max Drill Size in Concrete: 1-9/16” Max Core Bit Size in Concrete: 4” Optimal concrete thickness when chipping in hammer-only mode: : 1/2” to 1-3/8” 12 amp 120Volt Impact Energy: 6.1 ft. lbs No Load Blows Per Min: 1500-2900 No Load RPM Dimensions: 19” L x 4” W x 10-1/2” H Weight: 15.2 lbs If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| DEMOLITION HAMMER SDS MAX | |
  |
Bosch Model DH1020VC Includes: Auxiliary Handle Carrying Case Features: SDS Max bit system – tool free bit changes Variable Speed dial Vario-Lock rotates and lockes bit into12 different positions & optimizes working angles  Specfifications: 15 amp – 120V electric motor No load BPM: 850-1800 Length: 27.5” SDS MAX”Width: 5” Weight: 25.1 lbs If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| DEMOLITION HAMMER SDS MAX | |
  |
Bosch Mod. 11316EVS Hammer only – not for drilling Includes: Auxiliary Handle Carrying case  Features:SDS-max bit system – tool-free bit changes Variable speed dial 360 degree rotating auxiliary handle Specifications 14 amp 120 V electric motor 8′ power cord No Load BPM: 900-1890 Length: 22-1/2 in. Weight: 22-1/2 lbs
If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| JACK HAMMER, ELECTRIC | |
  |
Bosch 11304 Features: Powerful breaker hammer operates without a compressor for portability 2-way tool retainer accepts 1-1/8” hex air tool steel Vibration dampening handle for operator comfort Specifications: Ues 1-1/8” Hex Collar Hammer Steel 15 amp 120Volt 43 ft. lbs of Impact Energy 1,400 BPM Length: 29.75 in. Weight: 64 lbs If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| FLOOR TILE STRIPPER, ELECTRIC | |
    |
General Equip Cart Model CTS12 Bosch Hammer Model Features: Powerful electric hammer easily scrapes up stubborn glued on tile Includes: Cart, 50′ power cord, 3” Tile Removal Chisel Optional: Blade Holder with purchased scraper blade – see purchase prices below USE: For removal of ceramic tile, hardwood flooring materials and other covering removal applications. Utilizes a Bosch electric hammer with a 3” wide chisel to break through the high bond strengths of today’s mastics, glues and thin set materials. Not for removal of material from a wood floor. Use the Sinclair machine for removing materials adhered to a wood floor. BLADES: 5-3/4” Scraper Blade #CTS121800KIT” 8” Scraper Blade #CTS121900KIT 12” Scraper Blade #CTS122000KIT If using extension cords, must be at least 12 gauge for 50′ run and 10 gauge for 100′ run |
| ROTARY HAMMER BITS SDS MAX | |
  |
3/8” Carbide Tipped 1/2” Carbide Tipped 5/8” Carbide Tipped 3/4” Carbide Tipped 7/8” Carbide Tipped 1” Carbide Tipped 1-1/8” Carbide Tipped 1-1/4” Carbide Tipped 1-3/8” Carbide Tipped 1-1/2” Carbide Tipped 1-3/4” Carbide Tipped |
| CORE BITS SDS OR SPLINE | |
   |
Includes: SDS or Spline Shank, Core Bit, and Starter Bit 1-1/2” Carbide Tipped 2-1/2” Carbide Tipped 3” Carbide Tipped 3-1/2” Carbide Tipped 4” Carbide Tipped 5” Carbide Tipped 6” Carbide Tipped |
| DEMOLITION HAMMER BITS SDS MAX | |
 |
Bull Point |
 |
Flat Chisel 1” |
 |
Bushing Tool 1-3/4” |
 |
Tile Chisel 2” |
 |
Scaling Chisel 3” |
 |
Floor Scraper Blade 6” |
 |
Asphalt Cutter 5” |
 |
Clay Spade 4-1/2” |
 |
Ground Rod Driver 5/8” & 3/4” rods |
  |
Tamper Plate 8” with Tamper Shank |
| BREAKER HAMMER BITS | |
 |
1-1/8” HEX COLLAR AIR HAMMER STEEL |
 |
Moil Point – for general chipping |
 |
Narrow Chisel for general chipping |
 |
Chisel 3” – cleans concrete, scale, rust |
 |
Digging Chisel 3” asphalt, hard ground (NOT for concrete) |
 |
Asphalt Cutter 5” |
 |
Clay Spade 5-1/2”dig hard dirt, gravel |
 |
Floor Scraper 6” |
 |
Ground Rod Driver 5/8” & 3/4” Rods |
  |
Tamper Plate including Tamper Shank |
Kauai Tool & Equipment Rentals
Kauai Tool & Equipment Sales
