| JIG SAW (SABER SAW) | |
 |
Porter Cable Model 543 type 1 6 amp 115V Blades available for purchase |
|
|
|
| JIG SAW (SABER SAW) | |
 |
Bosch Model JS48-E Includes: Soft Carrying Bag, Bevel Wrench Specifications: 7 amp 120Volt Electric Max Bevel Cut: 45° Cutting Capacity Soft Wood: 5-7/8″ Cutting Capacity Aluminum: .875 Cutting Capacity Mild Steel: .375 Uses T-shank blades Blades available for purchase |
|
|
|
| Reciprocating Saw (Sawzall type) | |
 |
Bosch RS325 s/n 304002976 Specifications: 12amp motor, Length: 17.8″ long, 8′ power cord No load SPM: 0-2,800, stroke length: 1″ Includes: cloth carrying case Blades available for purchase |
|
|
|
| 6-1/2″ UNDERCUT SAW | |
 |
Crain Model 825 Specifications: 8.15 amp motor, No load RPM: 6,500 Max Cutting Height: 1″ Max Cutting Depth: 1-5.8″ Weight: 16 lbs Includes: wrench, carrying case, and 6-1/2″ 40T Carbide Blade #CRA821 There is a blade replacement charge if damaged |
|
|
|
| 7-1/4″ SKIL SAW, Magnesium | |
 |
Skil Model SPT77WML Includes: wrench, 1 rip blade Specifications: 15 amp 120V motor, diamond arbor No load RPM: 4400 Bevel Cut Cap.: 0-53 degrees Depth of cut @ 90 degrees: 2-3/8″ Depth of cut @ 45 degrees: 1-15/16″ Twist Lock Plug Weight: 11.5 lbs Nominal blade sharpening fee may be be charged If using ext cord: Up to 50 ft cord length: must be 14 gauge Up to 100 ft cord length: must be 12 gauge Saw Blades Available For Sale |
|
|
|
| BANDSAW, DEEP CUT | |
 |
Milwaukee Model 6232-21 Includes: Carrying Case Features: Cuts up to 5″ x 5″ material in one pass LED Light illuminates work surface Uses 44-7/8″ long bandsaw blades Specifications: 115V 11 amp motor Length: 21″ Weight: 14.5 lbs Saw Blades Available For Sale |
|
|
|
| 16-5/16″ BEAM SAW | |
 |
Makita Model 5402NA Features: Cuts 6-1/4″ at 90 degrees, Cuts 4-3/16″ at 45 degrees 87 db for quiet operation No load speed 2200 rpm AMPS (120V): 15 Overall length: 24-1/4″ long Net Weight: 32.1 lbs |
|
|
|
| 10″ MITER SAW | |
 |
Makita Model LS1020 Includes: dust bag, socket wrench, blade guide, holder set Dimension: 1 9-1/2″ x 18-1/2 x 18-11/16″ Max cut width 4-3/4″ at 0 degrees Max cut width 3-1/2″ at 45 degrees No Load speed: 4100 rpm Weight: 40 lbs |
|
|
|
| 10″ COMPOUND MITER SAW | |
 |
Makita Model LS1013 Includes: dust bag, #13 wrench, vertical rule, triangular rule (2) 322932-4 holders Specifications: 10″ blade with 5/8″ arbor Motor: 15 amps No Load Speed: 3700 rpm Dimensions: 29-7/8″ x 20-1/2″ x 24-5/8″ Weight: 46.5 lbs |
|
|
|
| 10″ MITER SAW | |
 |
Ryobi Model TS251U Power Type Corded Blade Diameter 10″ Motor Power in Amps 12.5 Max. RPM 5000 |
|
|
|
| 14″ METAL CUTTING CHOP SAW (ELECTRIC) | |
 |
Makita Model 2414 For cutting metal pipe or bar 14″ x1″ hole abrasive cutoff wheels – sold separately Includes: socket wrench, guide Max cutting capacity: 4-1/2″ at 45 or 90 deg.when cutting pipe 4-23/32″ at 90 deg when cutting sq bar 4-3/16″ at 45 deg when cutting sq bar. 5-1/2″ at 90 deg. when cutting angle iron No load speed 3800 rpm Weight: 16.7 lbs |
|
|
|
| 12″ CUT OFF SAW, ELECTRIC | |
 |
Bosch Model 1333 For cutting concrete or metal Uses 12″ x 1″ hole abrasive wheel – available for sale Includes: 3/8″ allen wrench, blade guard, inner & outer blade flanges Recessed spindle lock permits changing of blades without the need of a spindle wrench. 15 amp motor, 5,000 no load rpm Spindle thread: 5/8-11NC Weight: 24 lbs |
|
|
|
| 14″ CUT OFF SAW, ELECTRIC | |
 |
Bosch Model 1340 Features: For cutting concrete or metal Uses 14″ x 1″ hole abrasive cutoff wheels, available for sale Includes: 3/8″ allen wrench, blade guard, inner & outer blade flanges Recessed spindle lock permits changing of blades without the need of a spindle wrench. Specifications 15 amp motor, 5,000 no load rpm Spindle thread: 5/8-11NC Weight: 28 lbs |
|
|
|
| 10″ TABLESAW PORTABLE (ELECTRIC) | |
 |
Bosch Model 4000 Includes: Wheeled stand, blade guard locking fence, and miter gauge. Table Dimensions: 29″ x 21-1/2″ Motor: 4.4 HP 15 amp electric Weight: 60 lbs |
|
|
|
| 10″ TILE SAW | |
 |
IMER Model Combi 250 Features: Accurate cutting of large format tile or thin slabs up to 1/12″ thick Accurate 45 degree miter cuts with tilting head and rail system Includes: 10″ Continuous Rim Diamond blade fir tile, stone & porcelain Miter Gauge Built-in Laser for accurate long piece cutting Specifications: 1.75 hp electric motor Blade speed: 2800 rpm Water pan capacity: 12 gallons Water pump flow: 3 gallons per minute Noise level: 78 db(A) Dimensions 55″ L x 24″ H x 25″ W Weght including stand: 82 lbs |
|
|
|
| 14″ MASONRY & BRICK SAW | |
 |
IMER Model M350 Includes: 14″ Diamond blade Water Pan Pump Wrench Features: Built in folding leg stand gives sturdy base Large & accurate rolling cutting table Super accurate rolling tray Specifications:+B211:B223B21B211:B221 2 hp Electric Motor Motor Speed: 2850 rpm Max cutting length: 26″ (with plunge 30″) Max Cutting Depth: 4-3/4″ Cutting surface height from ground: 33.5″ Water pan capacity 10 gallons Water pump flow: 3 gallons per minute Dimensions: 47″ L x 51″ H x 28.5″ W Weight: 175 lbs |
|
|
|
| 14″ CUT OFF SAW, GAS | |
 |
Husqvarna Model K760 14″ x 20mm Diamond Blade Rental Available Features: For cutting concrete or steel Light weight, compact, low vibration Includes: T-wrench for blade 50:1 fuel-oil mix can – full Hearing protection (optional) Specifications: Blade diameter: 14″ Maximum cutting depth: 4″ 5 hp gas engine uses a 50:1 fuel/oil mix Cylinder displacement 4.48 cu. in. Weight: 20.6 lbs |
|
|
|
| 14″ CUT OFF SAW, GAS, HEAVY DUTY | |
 |
Husqvarna Model K970 14″ x 20mm Diamond Blade Rental Available Features: Larger engine, more powerful For cutting concrete, masonry or steel Light weight, compact, low vibration Includes: T-wrench for blade 50:1 fuel-oil mix can – full Hearing protection (optional) Specifications: Blade diameter: 14″ Maximum cutting depth: 4″ 6-1/2 hp gas engine uses a 50:1 fuel/oil mix Cylinder displacement 5.71 cu. in. Weight: 24 lbs |
|
|
|
| CONCRETE SAW, WALK BEHIND | |
 |
Husqvarna Model FS400LV 4-Hour minimum charge Features: Walk-behind saw is ideal for parking lots, streets, driveways, floors and other building and restoration Accommodates a 14″ or 18″ blade Specifications: Max Cutting Depth w/14″ blade: Max Cutting Depth w/18″ blade: 6.5″ Engine: Honda 11.7 hp gas Dimensions: 45.28 x 23 x 23.37 Weight: 218.25 lbs 14″ and 18″ Abrasive Blades are available for sale 14″ Diamond Blade for Concrete Available For Rent 14″ Diamond Blade for Asphalt Available For Rent |
|
|
|
| 14″-18″ WALK BEHIND GAS CONCRETE SAW | |
 |
Miller Sturdi Saw 4-Hour minimum charge Includes: 1-1/16″ combination Blade wrench Features: Walk-behind saw is ideal for parking lots, streets, driveways, floors and other building and restoration Accommodates a 14″ or 18″ blade Specifications: 14 hp Honda gas engine uses regular gas Maximum cut depth: 4″ with 14″ blade 6″ with 18″ blade Weight:288 lbs 14″ and 18″ Abrasive Blades are available for sale 14″ Diamond Blade for Concrete Available For Rent 14″ Diamond Blade for Asphalt Available For Rent |
|
|
|
| PLATE JOINER | |
 |
Porter Cable Model 555 115V electric |
|
|
|
To get pricing and reserve your rental time call or email us!
